Pay attention to the daily cleaning of the equipment and eliminate the hidden dangers of the equipment in time. Since most of the operating equipment is installed outdoors, it is necessary to strengthen the cleaning of the equipment during daily maintenance. So power equipment hosting maintenance: What are the daily maintenance and maintenance measures for power equipment?

Managed maintenance of power equipment: What are the daily maintenance and maintenance measures for power equipment?

1. Cleaning power equipment, according to the technical requirements and precautions of specific equipment, the use of reasonable and appropriate chemical reagents. During the cleaning period, do not clean the equipment with clean water. This will not only fail to achieve a satisfactory cleaning effect, but also cause corrosion to the power operating equipment, which is extremely detrimental to the performance of the power equipment. Cleaning the equipment with chemical reagents is not only harmless to the equipment, but also has a satisfactory cleaning effect.

2. Take anti-corrosion strategy to extend the service life of equipment. In the daily maintenance of power equipment, corrosion protection is very important, which directly affects the service life of power equipment. Corrosion protection of electrical equipment. The details are as follows: For exposed conductor joints, corrosion protection can be carried out. Compound grease can be applied directly to avoid joint oxidation and ensure the effectiveness of joint use; in the power system, the grounding grid is generally made of low carbon steel, buried in the soil, which is easy to cause corrosion. Therefore, the conductive anti-corrosion layer should be directly coated on the flat iron or galvanized steel, which is more conducive to the protection of the power grounding grid.

3. Avoid moisture to ensure the good operation of power equipment. There are many problems in high-voltage power distribution room, such as high humidity and heavy humidity. In order to do a good job in the moisture-proof work of the high-voltage power distribution room, the following measures should be taken: first, the hole of the switch cabinet and the cable trench should be blocked, and the isolation inside and outside the cable trench of the high-voltage power distribution room should be ensured to avoid water intrusion into the cable trench of the high-voltage power distribution room. At the same time, punch the inserted cable to prevent the cable from being affected by moisture. 2. inspect the roof of the high-voltage distribution room in detail, and deal with it immediately and effectively if leakage is found. In addition, do not brush lime on the roof of the high-voltage power distribution room, because once moisture occurs, the lime will fall off, which will have a very negative impact on the switch cabinet equipment. 3. the installation of industrial dehumidifiers, it is necessary to ensure the ratio of indoor space size and installation power, which is conducive to eliminating indoor humid air.

4. Formulate emergency plan and strengthen daily management. Through the daily maintenance of power operation equipment, power companies have an overall understanding of the actual operating conditions of the equipment. Based on this, we can predict equipment hidden or possible failures, and formulate targeted emergency plans in advance to avoid the expansion of adverse effects. At the same time, the electrical circuit should be clearly marked, which will provide convenience for troubleshooting electrical circuit faults and promote work efficiency. In addition, backup power supply equipment. If a component fails, it can be replaced immediately. Arrange professionals to record the actual application of power equipment components in detail to facilitate equipment management.

5. Strengthen the management of power workers, power management personnel are the main body of maintenance of power equipment. Therefore, it is very important to improve the maintenance ability and professional quality of power equipment management personnel. Therefore, power enterprises should build a high-quality, high-capacity power equipment management team. Train professional power equipment management personnel to further improve their quality. In daily maintenance, they can find hidden problems and ensure the reliability, safety and stability of the equipment. At the same time, the moral quality of power equipment management personnel needs to be further improved. According to the daily maintenance procedures, strictly implement the maintenance work, strengthen the power equipment management responsibility. Through the examination, the work ability and level of power equipment management personnel are evaluated, and the initiative and enthusiasm of power equipment management personnel are stimulated and mobilized.